Plastic containers, hollow blow molding containers, are made by hollow molding. There are open plastic buckets, cans and closed plastic buckets, cans, open plastic buckets, cans are mainly used to hold solid chemicals, food, medicine, etc. Closed plastic buckets, cans are mainly used to hold liquid materials. It has the characteristics of light weight, non-fragile, corrosion-resistant and recyclable. Its maximum volume is 450L and the maximum weight of loading goods is 400 kg.
Production process
In the design and production of plastic containers, attention must be paid to the following problems: bloating, elongation, vertical load strength, rigidity of the container, supporting surface, cover thread, shape and outer surface, forming, temperature and pressure, etc. in order to ensure the mechanical properties of plastic containers, formability, mold structure and processing rationality and Container usage conditions. The technological process is: mixing, screw extrusion, mold closing, blow molding, die opening, cooling, trimming and testing.
quality requirement
For plastic containers used for export commodity transport packaging, the inspection shall be carried out in accordance with SN/T0271-93 "Inspection Rules for Plastic Containers for Export Commodity Transportation Packaging" and in accordance with GB/T13508-92 "Polyethylene Blowing Bucket".
(1) Appearance: the wall thickness ratio of the symmetrical part of the barrel body is not more than 2:1, no trachoma, no plasticity, smooth and clean outer wall and mouth, no more than 2 bubbles with diameter not more than 2 mm, no more than 4 mm black spots impurity length, close overlap of the barrel mouth, good interchangeability.
Plastic containers, hollow blow molding containers, are made by hollow molding. There are open plastic buckets, cans and closed plastic buckets, cans, open plastic buckets, cans are mainly used to hold solid chemicals, food, medicine, etc. Closed plastic buckets, cans are mainly used to hold liquid materials. It has the characteristics of light weight, non-fragile, corrosion-resistant and recyclable. Its maximum volume is 450L and the maximum weight of loading goods is 400 kg.
Production process
In the design and production of plastic containers, attention must be paid to the following problems: bloating, elongation, vertical load strength, rigidity of the container, supporting surface, cover thread, shape and outer surface, forming, temperature and pressure, etc. in order to ensure the mechanical properties of plastic containers, formability, mold structure and processing rationality and Container usage conditions. The technological process is: mixing, screw extrusion, mold closing, blow molding, die opening, cooling, trimming and testing.
quality requirement
For plastic containers used for export commodity transport packaging, the inspection shall be carried out in accordance with SN/T0271-93 "Inspection Rules for Plastic Containers for Export Commodity Transportation Packaging" and in accordance with GB/T13508-92 "Polyethylene Blowing Bucket".
(1) Appearance: the wall thickness ratio of the symmetrical part of the barrel body is not more than 2:1, no trachoma, no plasticity, smooth and clean outer wall and mouth, no more than 2 bubbles with diameter not more than 2 mm, no more than 4 mm black spots impurity length, close overlap of the barrel mouth, good interchangeability.
Mr. Fan13119890999
